The Lian Li 12KW Water Cooling Kit combines a radiator, circulation pump and adjustable fan control in one floor-standing assembly. It is designed for heat loads up to 12 kW and can support one or two compatible water-cooled ASIC miners when the stated thermal and hashrate limits are observed.

Choose the connection kit by measuring the inlet and outlet on the miner's water-cooling plate manifold. The 10 mm package includes PE10 fittings and 10 mm quick connectors, while the 12 mm package includes PE12 fittings and 12 mm quick connectors. Do not select by miner brand alone.

Named fitments include Antminer S19+ Hyd and S19 Pro+ Hyd, plus WhatsMiner M33S+, M33S++, M53 and M53S. Other Antminer, WhatsMiner, IceRiver, Avalon and Innosilicon installations require a compatible water-cooling circuit or conversion and must be checked for hose size, heat load and routing.

The cooling unit uses a 220 V input through a C14 female socket and requires a compatible C13 power cord. Before commissioning, fill the loop with approximately 8 L of appropriate fluid, seat the inlet pipe fully, purge trapped air and inspect every joint for leaks. Keep all electrical equipment disconnected while filling or servicing the loop.

For capacity planning, limit a single connected miner to 400 TH/s or less. With two connected miners, keep their combined hashrate at or below 500 TH/s and their combined heat load within 12 kW. Two-miner operation also requires suitable ambient conditions, airflow and balanced plumbing.

Each variation includes the selected 10 mm or 12 mm fitting kit and regional version. Minimum order quantity is one unit, and the listed parcel shipping charge applies per unit.